fbpx

The app for your tank

The Aqvify app is easy to use!

Instant and past info about levelvolume, fill percentage and inflow. Alarms for high and low levels. Easy sharing of access.

The Aqvify app is available in English, Italian, Spanish, Finnish, French, Portuguese and Swedish.

Home

The number of liters displayed indicates the number of liters of water currently between the water surface and the Minimum Allowed Level* set for your well.

Level measured from the bottom of the tank. It is possible to set an offet if the sensor for some reason is not placed on the bottom.

Percentage for the fill rate of the total volume.

The illustration gives a quick view of how much of thr that that is filled. 

The graph shows the approximate amount of water used per hour in the last 24 hours.

Use is an indication of what the current amount could alternatively be used for, based on general water consumption.

Analysis

The time span of the graphs is selected with the buttons at the top. You can also zoom in on each graph by “pinching” with two fingers.

The graphs show:

Volume shows the number of liter in the tank.

Level – min and max (meters) from the bottom. For 7 days and longer, two shaded lines are shown with the upper line showing the maximum level and the lower line showing the minimum level per day. For shorter time spans, minute values are shown.

Approximate consumption (liters) shows water withdrawal.

Inflow (liters/h) shows the “hourly liters ” of water flowing into the tank.

Aqvify tank Alarms

 Alarms

On the alarms page, you can set and enable/disable SMS alerts for low levels or high levels.

Check/change your mobile number on the Profile page.

Aqvify tank Settings<br />

Profile

The profile page lists your Aqvify-devices, info about the app, and a link to these instructions. Here you can also easily add more users using an access code you can share via email, SMS, etc.

Your Aqvify

General Change the name of the device. Information about your Aqvify.

Properties Basic device settings such as tank position, diameter, length/height and sensor offset from the bottom.

Use Set how the tank is used and by how many people. This information will later be used to compare use with others.

Users Add new users, change roles/permissions of existing users and change the owner of the Aqvify.

You can be Owner, User and Installer of the well. Users with “Read and Write” rights can view metrics, change settings and invite/change users. “Read” only gives the right to view metrics.

Invite users by selecting a role and then share the unique access code by SMS, email or over a coffee. The code is valid for seven days.

Aqvify kit
Own installation, or take help from our installers

From 550 EUR (incl. VAT)

  • Complete Aqvify kit with the cable lengths of your choice

  • Aqvify app for iOS/Android

  • 1 year's subscription included - thereafter 99 EUR/year alt. 9.9 EUR/month, including SIM and all mobile data

  • Free CO2-neutral shipping

  • Personal support